The pepper and water science trick is one of the easiest magic tricks you can perform. Here's how to do the trick and an explanation of how it works.

Materials for the Pepper & Water Trick

  • black pepper
  • water
  • dishwashing liquid
  • plate or bowl
Performing the Pepper & Water Trick

  • Pour water into a plate or bowl.
  • Shake some pepper onto the water.
  • If you dip your finger into the pepper and water, nothing much happens.If you put a drop of dishwashing liquid on your finger and then dip it into the pepper and water the pepper will rush to the outer edges of the dish. If you are doing this as a 'trick' then you might have one finger that is clean and another finger that you dipped in detergent before performing the trick.
How the Pepper & Water Trick Works
When you add detergent to water the surface tension of the water is lowered. Water normally bulges up a bit, like what you see when you look at a water drop. When the surface tension is lowered, the water wants to spread out. As the water flattens on the dish, the pepper that is floating on top of the water is carried to the outer edge of the plate as if by magic

The rest of his body was so streaked, and spotted, and marbled with the same shrouded hue, that, in the end, he had gained his distinctive appellation of the White Whale; a name, indeed, literally justified by his vivid aspect, when seen gliding at high noon through a dark blue sea, leaving a milky-way wake of creamy foam, all spangled with golden gleamings.

Nor was it his unwonted magnitude, nor his remarkable hue, nor yet his deformed lower jaw, that so much invested the whale with natural terror, as that unexampled, intelligent malignity which, according to specific accounts, he had over and over again evinced in his assaults. More than all, his treacherous retreats struck more of dismay than perhaps aught else. For, when swimming before his exulting pursuers, with every apparent symptom of alarm, he had several times been known to turn round suddenly, and, bearing down upon them, either stave their boats to splinters, or drive them back in consternation to their ship.

WeddingInterior fashionflowerother fashioncars
Already several fatalities had attended his chase. But though similar disasters, however little bruited ashore, were by no means unusual in the fishery; yet, in most instances, such seemed the White Whale's infernal aforethought of ferocity, that every dismembering or death that he caused, was not wholly regarded as having been inflicted by an unintelligent agent.

Judge, then, to what pitches of inflamed, distracted fury the minds of his more desperate hunters were impelled, when amid the chips of chewed boats, and the sinking limbs of torn comrades, they swam out of the white curds of the whale's direful wrath into the serene, exasperating sunlight, that smiled on, as if at a birth or a bridal.

His three boats stove around him, and oars and men both whirling in the eddies; one captain, seizing the line-knife from his broken prow, had dashed at the whale, as an Arkansas duellist at his foe, blindly seeking with a six inch blade to reach the fathom-deep life of the whale. That captain was Ahab. And then it was, that suddenly sweeping his sickle-shaped lower jaw beneath him, Moby Dick had reaped away Ahab's leg, as a mower a blade of grass in the field. No turbaned Turk, no hired Venetian or Malay, could have smote him with more seeming malice. Small reason was there to doubt, then, that ever since that almost fatal encounter, Ahab had cherished a wild vindictiveness against the whale, all the more fell for that in his frantic morbidness he at last came to identify with him, not only all his bodily woes, but all his intellectual and spiritual exasperations. The White Whale swam before him as the monomaniac incarnation of all those malicious agencies which some deep men feel eating in them, till they are left living on with half a heart and half a lung. That intangible malignity which has been from the beginning; to whose dominion even the modern Christians ascribe one-half of the worlds; which the ancient Ophites of the east reverenced in their statue devil;—Ahab did not fall down and worship it like them; but deliriously transferring its idea to the abhorred white whale, he pitted himself, all mutilated, against it. All that most maddens and torments; all that stirs up the lees of things; all truth with malice in it; all that cracks the sinews and cakes the brain; all the subtle demonisms of life and thought; all evil, to crazy Ahab, were visibly personified, and made practically assailable in Moby Dick. He piled upon the whale's white hump the sum of all the general rage and hate felt by his whole race from Adam down; and then, as if his chest had been a mortar, he burst his hot heart's shell upon it.

It is not probable that this monomania in him took its instant rise at the precise time of his bodily dismemberment. Then, in darting at the monster, knife in hand, he had but given loose to a sudden, passionate, corporal animosity; and when he received the stroke that tore him, he probably but felt the agonizing bodily laceration, but nothing more. Yet, when by this collision forced to turn towards home, and for long months of days and weeks, Ahab and anguish lay stretched together in one hammock, rounding in mid winter that dreary, howling Patagonian Cape; then it was, that his torn body and gashed soul bled into one another; and so interfusing, made him mad. That it was only then, on the homeward voyage, after the encounter, that the final monomania seized him, seems all but certain from the fact that, at intervals during the passage, he was a raving lunatic; and, though unlimbed of a leg, yet such vital strength yet lurked in his Egyptian chest, and was moreover intensified by his delirium, that his mates were forced to lace him fast, even there, as he sailed, raving in his hammock. In a strait-jacket, he swung to the mad rockings of the gales. And, when running into more sufferable latitudes, the ship, with mild stun'sails spread, floated across the tranquil tropics, and, to all appearances, the old man's delirium seemed left behind him with the Cape Horn swells, and he came forth from his dark den into the blessed light and air; even then, when he bore that firm, collected front, however pale, and issued his calm orders once again; and his mates thanked God the direful madness was now gone; even then, Ahab, in his hidden self, raved on. Human madness is oftentimes a cunning and most feline thing. When you think it fled, it may have but become transfigured into some still subtler form. Ahab's full lunacy subsided not, but deepeningly contracted; like the unabated Hudson, when that noble Northman flows narrowly, but unfathomably through the Highland gorge. But, as in his narrow-flowing monomania, not one jot of Ahab's broad madness had been left behind; so in that broad madness, not one jot of his great natural intellect had perished. That before living agent, now became the living instrument. If such a furious trope may stand, his special lunacy stormed his general sanity, and carried it, and turned all its concentred cannon upon its own mad mark; so that far from having lost his strength, Ahab, to that one end, did now possess a thousand fold more potency than ever he had sanely brought to bear upon any one reasonable object.

Start a Electric vehicle Charging Station



"Hundreds of charging stations have been built, thousands to go"


An electric vehicle charging station, also called EV charging stationelectric recharging pointcharging point,charge point and EVSE (Electric Vehicle Supply Equipment), is an element in an infrastructure that supplies electric energy for the recharging of plug-in electric vehicles, including all electric cars neighborhood electric vehicle and plug-in hybrids.

Electric vehicles hitting the U.S. market. The all-electric Nissan Leaf completely sold out before the car even arrived in U.S. showrooms, according to Agence France-Presse. With that kind of demand, the charging stations to get those cars running are also going to be in high demand. "Our mission is to insure that people don't hesitate to buy electric because they're worried about fueling," says Richard Lowenthal, CEO of Coulomb Technologies, a Campbell (Calif.) company that builds charging stations. "The key is that they fuel a little differently." In general, the cars take hours to charge, so stations are needed where cars are parked. Although garages are often referred to as the perfect place, Lowenthal says there are better spots. "In the U.S. there are 250 million cars and only 50 million garages. We're busy putting them elsewhere, like the workplace."

EV Charging Station Infrastructure Costs



                                   

Electric vehicles seem to have finally gained a solid foothold. With continued adoption, there will be an increasing need for access to charging locations. We recognize that many drivers today do most of their charging at home, but many others still require access to a robust nationwide charging station network before even considering the purchase of an electric vehicle. But high costs of equipment and installation are currently impeding the build-out of such a network. Therefore, cost-effective solutions are needed to ensure future investment in charging stations.
We recently interviewed over a dozen companies involved with charging station infrastructure—including utilities, automakers, cities, research institutions, and charging station companies—to pull back the veil on current EV charging station infrastructure costs. From there, the next post in this series can then explore charging station business models and strategies to reduce those per-station costs.
We’ve broken down the cost into several categories: 1) the actual charging station hardware, 2) other hardware and materials, 3) electrician and other labor, 4) mobilization, which we define as time for the electrician and others to prep and get to the worksite (often including an initial on-site consultation), and 5) permitting.
Name of Some car charging  station companies
PS2000 Electric Car Charging Station : PEP Stations is a leading EV charging station company based in Detroit.  PEP's electric car chargers are commercial, dual Level 2 electric car charging stations with an architectural design and a flexible operating model that require no subscriptions for electric vehicle charging.   PEP's smart PS2000 is credit card capable electric vehicle charging station with monitoring and reporting features. PEP's charging stations for electric vehicles are represented by Hubbell, serviced by Service USA and monitored by Axeda Corporation.

Car Charging Group Inc (CCGI): Car Charging Group, Inc., a development stage company, acquires and installs electric vehicle (EV) charging stations. Its services enable EV drivers to recharge at various locations in the United States. The company also provides residential EV charging solutions; and site recommendations, and management and maintenance services.




List of secret codes in Android
Here is the list of secret codes in android phones which makes you to do hidden tricks in your android phone & make your life simple.

S.No.
Secret Codes
Functions
1
*#06#                                      
To check IMEI of your device, enter this code
2
*#*#4636#*#*
To get information about battery,wifi, usage statistics and device.
3
*#*#1111#*#*
Connectivity test for wifi,bt,gps,fm
4
*#*#8255#*#*
This code can be used to launch GTalk Service Monitor
5
*#*#1234#*#* 
PDA & Phone


Pratico Clean & Responsive Blogger Template
Pratico is a clean minimalist Blogger blogging theme. It’s super simple. It has a responsive design meaning your content will be displayed beautifully on all mobile devices.

Features of Pratico Responsive Blogger Template :
  • Fully Responsive Design
  • Auto resize thumbnail image
  • Well Documentation
  • Threaded Comment
  • Optimize SEO
  • Auto Author Image
  • Grid based Design
  • Newsletter Subscription
  • Custom Error 404 Page
  • Compatible with major browsers (IE8+,Mozilla,Chrome,Safari)
  • Professional admin layout, help you easy work with blog layout.

Note : It is forbidden to remove the credit link due to the elimination of the credit links will make your blog to redirect Our site. For those who want to remove can buy Full Version.


Template Customization Instructions:

How to Change Author Information:

To Edit AUTHOR DESCRIPTION(SIDEBAR)in this theme you can follow this step:

1. On Blogger Dashbord Click Template

2. Click Edit HTML

3. Scroll down and Find this Code :

<div class='head-bg' style='background-image: url(https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEgrZeRFRYTdCjSvZS1wm7fiOxx9kGZCxCDyH4EXYzePOQwr4JuOU1RRZIobrr6_U8y2jvnUQCqoCfWIxRAGvfXW7qqRlvqJeKKNXFdGPecZ3ubXcuVJcUTptCAFgb5aqgafKj_AmraM1ZwC/s1600/about-block-bg2.jpg)'><div class='my-pic'><img alt='Ahmed Ebraheem' src='https://blogger.googleusercontent.com/img/b/R29vZ2xl/AVvXsEhun-pQmRoGft9vFSLZU5lg-tP0Ng8axPUu3QTD-7AJOVj_jEKSNHxmk6ezCc5KyyXK_KPReh9J7eFhjEbcUIudlgOAOQFohSrdZDg0EW1wLa2T5UwcfHMIuTq2wiOMzNB2MDtbap6qDH27/s1600/my-pic-widget.jpg'/></div><div class='my-data'><span class='my-name'>Ahmed Ebraheem&lt;/span> <span class='my-job'>Web Developer</span></div></div><div class='my-words'>Duis aute irure dolor in reprehenderit voluptate velit esse cillum dolore eu fugiat nulla pariatur. Excepteur sint occaecat cupidatat non proident.</div>

Replace this Blue color url with your Author image url.

Replace this Green color text with your Author Name.

Replace this Red color Text with your Author Description text.


Support:
We wrote a very detail and clear guide to help you easy work with Pratico Responsive Blogger Template. But if you have any questions, please feel free to ask on our comment system, we’ll answer your questions immediately if you have same GMT with me (GMT +5.30).
Note: Premium Version buyers will get advance and lifetime support guarantee.


Get this template for FREE with giving proper credits to us, no support included.
  • Remove Footer credits
  • One time payment
  • For Unlimited Domains
  • Lifetime Premium Support
  • No Encrypted Scripts
  • Lifetime Template Updates
  • And Much More....

"This, shipmates, this is that other lesson; and woe to that pilot of the living God who slights it. Woe to him whom this world charms from Gospel duty! Woe to him who seeks to pour oil upon the waters when God has brewed them into a gale! Woe to him who seeks to please rather than to appal! Woe to him whose good name is more to him than goodness! Woe to him who, in this world, courts not dishonour! Woe to him who would not be true, even though to be false were salvation! Yea, woe to him who, as the great Pilot Paul has it, while preaching to others is himself a castaway!"

He dropped and fell away from himself for a moment; then lifting his face to them again, showed a deep joy in his eyes, as he cried out with a heavenly enthusiasm,—"But oh! shipmates! on the starboard hand of every woe, there is a sure delight; and higher the top of that delight, than the bottom of the woe is deep. Is not the main-truck higher than the kelson is low? Delight is to him—a far, far upward, and inward delight—who against the proud gods and commodores of this earth, ever stands forth his own inexorable self. Delight is to him whose strong arms yet support him, when the ship of this base treacherous world has gone down beneath him. Delight is to him, who gives no quarter in the truth, and kills, burns, and destroys all sin though he pluck it out from under the robes of Senators and Judges. Delight,—top-gallant delight is to him, who acknowledges no law or lord, but the Lord his God, and is only a patriot to heaven. Delight is to him, whom all the waves of the billows of the seas of the boisterous mob can never shake from this sure Keel of the Ages. And eternal delight and deliciousness will be his, who coming to lay him down, can say with his final breath—O Father!—chiefly known to me by Thy rod—mortal or immortal, here I die. I have striven to be Thine, more than to be this world's, or mine own. Yet this is nothing: I leave eternity to Thee; for what is man that he should live out the lifetime of his God?"

He said no more, but slowly waving a benediction, covered his face with his hands, and so remained kneeling, till all the people had departed, and he was left alone in the place.

Returning to the Spouter-Inn from the Chapel, I found Queequeg there quite alone; he having left the Chapel before the benediction some time. He was sitting on a bench before the fire, with his feet on the stove hearth, and in one hand was holding close up to his face that little negro idol of his; peering hard into its face, and with a jack-knife gently whittling away at its nose, meanwhile humming to himself in his heathenish way.

But being now interrupted, he put up the image; and pretty soon, going to the table, took up a large book there, and placing it on his lap began counting the pages with deliberate regularity; at every fiftieth page—as I fancied—stopping a moment, looking vacantly around him, and giving utterance to a long-drawn gurgling whistle of astonishment. He would then begin again at the next fifty; seeming to commence at number one each time, as though he could not count more than fifty, and it was only by such a large number of fifties being found together, that his astonishment at the multitude of pages was excited.

3- D Printing Shop



"Fabricating items in low-cost printers"

3D printing or additive manufacturing (AM) is any of various processes of making a three- dimensional object from a 3D model or other electronic data source primarily through additive processes in which successive layers of material are laid down under computer control. A 3D printer is a type of industrial robot.

Need a new lens cap? Print it up. That's the way of the future. Instead of fabricating in a factory and shipping the item wherever it's needed, 3D printers are expected to produce everything from architect models to sinks to spare camera parts. "It's already happening at service bureaus," says Jackie Fenn, an analyst at Gartner. "It hasn't happened at a physical shop like Kinko's, but I think it's very possible."

History
Early AM equipment and materials were developed in the 1980s. They were expensive and most required special handling.The names 3D printing and additive manufacturing did not yet have currency as umbrella terms for the field; each AM technology usually went by its own name. In 1984, Chuck Hull of 3D Systems Corp, invented a process known asstereolithography employing UV lasers to cure photopolymers. Hull also developed the STL file format widely accepted by 3D printing software, as well as the digital slicing and infill strategies common to many processes today. Also during the 1980s, the metal-sintering forms of AM were being developed (such as selective laser sintering and direct metal laser sintering), although they were not yet called 3D printing or AM at the time.
In 1990, the plastic extrusion technology most widely associated with the term "3D printing" was commercialized by Stratasysunder the name fused deposition modeling (FDM). In 1995, Z Corporation commercialized an MIT-developed additive process under the trademark 3D printing (3DP), referring to a proprietary process inkjet deposition of liquid binder on powder. The term was later applied more loosely to distinct but related inkjet material deposition or drop-on-droptechnologies.
In 2005, a rapidly expanding hobbyist and home-use market was established with the inauguration of the open-source RepRap and Fab@Home projects. Virtually all home-use 3D printers released to-date have their technical roots in the on-going RepRap Project and associated open-source software initiatives "The RepRap's Heritage. In distributed manufacturing, one study has found 3D printing could become a mass market product enabling consumers to save money associated with purchasing common household objects.

General Principles


3D printable models

3D printable models may be created with a computer aided design package or via 3D scanner. The manual modelling process of preparing geometric data for 3D computer graphics is similar to plastic arts such as sculpting. 3D scanning is a process of analysing and collecting digital data on the shape and appearance of a real object. Based on this data, three-dimensional models of the scanned object can then be produced.
Both manual and automatic creation of 3D printable models is difficult for average consumers. This is why several 3D printing marketplaces have emerged over the last years. Among the most popular are Shapeways,ThingiverseMyMiniFactory and Threeding 

Printing

To perform a print, the machine reads the design from 3D printable file (STL File) and lays down successive layers of liquid, powder, paper or sheet material to build the model from a series of cross sections. These layers, which correspond to the virtual cross sections from the CAD model, are joined or automatically fused to create the final shape. The primary advantage of this technique is its ability to create almost any shape or geometric feature.
Printer resolution describes layer thickness and X-Y resolution in dpi (dots per inch), or micrometres. Typical layer thickness is around 100 µm (250 DPI), although some machines such as theObjet Connex series and 3D Systems' ProJet series can print layers as thin as 16 µm (1,600 DPI). X-Y resolution is comparable to that of laser printers. The particles (3D dots) are around 50 to 100 µm (510 to 250 DPI) in diameter.
Construction of a model with contemporary methods can take anywhere from several hours to several days, depending on the method used and the size and complexity of the model. Additive systems can typically reduce this time to a few hours, although it varies widely depending on the type of machine used and the size and number of models being produced simultaneously.
Traditional techniques like injection moulding can be less expensive for manufacturing polymer products in high quantities, but additive manufacturing can be faster, more flexible and less expensive when producing relatively small quantities of parts. 3D printers give designers and concept development teams the ability to produce parts and concept models using a desktop size printer.

Finishing

Though the printer-produced resolution is sufficient for many applications, printing a slightly oversized version of the desired object in standard resolution and then removing material with a higher-resolution subtractive process can achieve greater precision. As with the LUMEX Avance-25  and other machines slated for IMTS 2014.
Some additive manufacturing techniques are capable of using multiple materials in the course of constructing parts. Some are able to print in multiple colours and color combinations simultaneously. Some also utilise supports when building. Supports are removable or dissolvable upon completion of the print, and are used to support overhanging features during construction.

Current Technologies

3D printing is an additive technology in which objects are built up in a great many very thin layers. The first commercial 3D printer was based on a technique called stereolithography. This was invented by Charles Hull in 1984. Stereolithographic 3D printers (known as SLAs orstereolithography apparatus) position a perforated platform just below the surface of a vat of liquid photopolymer.Stereolithographic printers remain one of the most accurate types of hardware for fabricating 3D output, with a minimum build layer thickness of only 0.06mm (0.0025 of an inch).
Another 3D printing technology based on the selective solidification of a tank of liquid -- or 'vat polymerization' -- is DLP projection. This uses a projector to solidify object layers one complete cross-section at a time, rather than using a laser to trace them out.
A final 3D printing technology that creates objects by using a light source to solidify a liquid photopolymer is known generically as 'material jetting', or commercially as 'polyjet matrix'. This was pioneered by a company called Object.

Commercial 3D Printers and Online Services

A wide range of commercial 3D printers for industrial application are now available from a range of manufactuers, the two largest of whom are 3D Systems (which works with most technologies and is rapidly acquiring many smaller manufacturers) and Stratasys (which offers FDM and polyjet matrix harware, as well as special 'drop on demand' wax 3D printers for dental work). Both of these companies had a market capitalization at the end of 2012 of over $3 billion.
Other large 3D printer manufactuers that are publically traded are Archam (which produces electron beam melting (EMB) machines), the aforementioned ExOne with their metal and sand binder jetting 3D printers, and Organovo, who specialize in bioprinting.
Other large but private 3D printer manufacturers of note include EnvisionTEC (who specialize in DLP projection hardware but also make a 'bioplotter' for tissue engineering), EOS (who make selective laser sintering devices for producing objects in metals or sand), Voxeljet (who make really large printers for binder jetting in sand or plastic powders), SLM Solutions (who specialize in selective laser melting), and Optomec (who produce directed energy deposition printers using their own 'laser engineered net shaping' (LENS) technology). You can find information on these and other industrial 3D printing manufactuers in my 3D Printing Directory.



Air Pressure Experiment
This is one of the best examples of air pressure experiments with water.

  • Take a glass and fill one-third of it with water. 
  • Place a cardboard over the mouth of the glass. 
  • The cardboard should be bit bigger than the mouth. 
  •  Now put some pressure on the cardboard from the left hand and invert the glass with the right hand. 
  •  Slowly remove the hand and see what happens. 
  •  The water does fall from the glass, retaining the cardboard and the water in the same place as before.  
  • This takes place because the air pressure outside,  ie.  14.7 psi,  is more heavier than the combining weight of the water and air inside the glass.

In the recent few years, we have seen a number of developments in this category. Smart watches in this regard were the earliest to be seen. Experts and analysts are still predicting that the wearable technology will prevail in the coming years. This year’s Consumers’ Electronics Show (CES 2014) displayed a range of innovations in the segment of wearable technologies. The most notable among these was Google Glass might become a bit of a laughing stock when it comes to the consumer world; the computing giant is trying to make the wearable tech more attractive to the business world. The search engine giant has recently announced it is working on a host of new applications that are specifically designed for the business world. Earlier this week.


Dehydration is the number one cause of day time fatigue, but how do you know when you’re dehydrated? By the time you feel thirsty, you’ve already lost between 1-2% of your body’s total water content!Signs and symptoms of dehydration include dry mouth, dry eyes, muscle cramping, constipation, fatigue, and headaches, to name just a few. However, there are steps you can take to make sure you don’t become dehydrated.
Coconut Water
For a twist on ordinary tap or bottled water give coconut water a try.  Coconut water is low in calories, fat-free, cholesterol-free and a great source of vitamins and minerals – especially potassium, which helps replenish all those electrolytes you lose when you sweat. Taste-wise, coconut water is a slightly nutty-sweet drink that’s refreshing served over ice and it’s delicious with a splash of fruit juice.

Seltzer
When it’s baking hot outside youcan’t beat  the bubbly coolness of seltzer, which  has  zero calories  and sodium, and comes in a variety of flavors. What’s great about seltzer is you can enjoy it simply or jazz it up with a splash of 100-percent fruit juice, a spring of mint or herb, or some fresh fruit slices. For dieters seltzer can be the perfect no-cal mixer for skinny cocktails. Be sure to check the label on flavored seltzers though because some brands contain caloric sweeteners.


Fresh Fruit
Not all thirst quenchers are poured.  Many of your favorite summer fruits contain at least 90 percent water and with each juicy bite you also get a boost of vitamins and minerals. Watermelon for example is 92 percent water and each slice contains essential hydrating salts, calcium, magnesium, and potassium. Raspberries, blueberries and blackberries all contain about 85 percent water and each is a great source of healthy fiber. Grapefruit is about 90 percent water, and pink and red varieties are especially nutritious, containing phytonutrients, vitamins C and A, as well as the cancer-fighting antioxidant lycopene.

Veggies
Like fruit many summer vegetables rank among nature’s best thirst quenchers: Cucumber holds first place with its 97 percent water content. Tomatoes are a close second consisting of about 95 percent water -whether you go for the big meaty ones or bite-sized grape and cherry varieties.  All shades of bell peppers are mainly water, but green peppers top the list containing 94 percent water and in a one cup serving you also get 100 percent of your daily value of vitamin C.


Low-Fat Milk and Yogurt
Low-fat dairy products such as low-fat milk and yogurt contain 90 percent and 85 percent waterrespectively. Not only do these foods help you stay hydrated, they’re also a great source of protein, phosphorus, potassium, and the vitamins A and D – all good reasons to get your recommended three cups a day.





via-foxnews

Linezap Responsive Blogger Template
Linezap Blogger Template is a simple & clean designed Blogger Theme with a great responsive design. This theme perfect for Search Engine Optimization. Its High User Friendly Blogger Template. Its perfect for News, Magazine or portofolio websites. With an attractive color combination and impressed professionals and has many features.

Features of Linezap Responsive Blogger Template :
  • Fully Responsive Design
  • Advance Search Engine Optimization
  • Auto resize thumbnail image
  • Tabbed Menu
  • Well Documentation
  • Threaded Comment
  • Recent Post By Label
  • Related posts support
  • Ads Ready
  • 2 Comment System (Blogger, Facebook)
  • Auto Author Image
  • Grid based Design
  • Newsletter Subscription
  • Custom Error 404 Page
  • Compatible with major browsers (IE8+,Mozilla,Chrome,Safari)
  • Professional admin layout, help you easy work with blog layout.
Note : It is forbidden to remove the credit link due to the elimination of the credit links will make your blog to redirect Our site. For those who want to remove can buy Full Version.

Template Customization Instructions:

Note : If you make your blog private then this template doesn't work.

To customize Long Styles Layout Widgets follow these steps:

1. Go To Blogger >> Layout
2. Then choose the Long style widget which you want to Customize Then Click On Edit Button.


Then You will See a Popup Window Like Image Given Below. Then Copy the below code and paste. Then Press Save Button.


<script> 
document.write('<div class="recent-post-title"><h2><a href="/search/label/ThisLabel?max-results=10">Label Name</a></h2></div>');
document.write("<script src=\"/feeds/posts/default/-/ThisLabel?orderby=published&alt=json-in-script&callback=mythumb1\"><\/script>");
</script>

Change This In Script:

"This Label" With your label name as it is in your URL.

"Label Name" Change it with the name you want to appear on main page.

Example :



To customize short Styles Layout Widgets follow these steps:



1. Go To Blogger >> Layout

2. Then choose the short style widget which you want to Customize Then Click On Edit Button.


Then You will See a Popup Window Like Image Given Below. Then Copy the below code and paste. Then Press Save Button.

<script> 
document.write('<div class="recent-post-title"><h2><a href="/search/label/ThisLabel?max-results=10">Label Name</a></h2></div>');
document.write("<script src=\"/feeds/posts/default/-/ThisLabel?orderby=published&alt=json-in-script&callback=mythumb\"><\/script>");
</script>

Change This In Script:

"This Label" With your label name as it is in your URL.

"Label Name" Change it with the name yoiu want to appear on main page.

Example :



Same AS above you Have to Customize All other STYLE WIDGETS.


Support:
We wrote a very detail and clear guide to help you easy work with Linezap Responsive Blogger Template. But if you have any questions, please feel free to ask on our comment system, we’ll answer your questions immediately if you have same GMT with me (GMT +5.30).
Note: Premium Version buyers will get advance and lifetime support guarantee.

Get this template for FREE with giving proper credits to us, no support included.
  • Remove Footer credits
  • One time payment
  • For Unlimited Domains
  • Lifetime Premium Support
  • No Encrypted Scripts
  • Lifetime Template Updates
  • And Much More....

Start a Business of Space Hotel



"Space tourism:  Only for the very, very rich"

A new space race is on, and this time it's to see who can build the galaxy's best bed-and-breakfast. A Barcelona-based firm called Galactic Suite Limited claims it will be the first to build a space hotel, opening its $3 billion Galactic Suite to the (very rich) public in 2012.

"The punchline is that we are now seeing the birth of the Googles and Apples of the space business," says Peter H. Diamandis, a pioneer in the commercial space industry. "There are a number of companies working on space hotels." At the forefront is Bigelow Aerospace, which launched two prototypes of space hotels and currently plans a commercial space complex by 2014. Called Sundancer, the hotel is expected to have space for up to six people on a short-term basis. A Russian company called Orbital Technologies is also racing to have the first commercial space station. A vision of the station is in the photo above.


  1. The Space Hotel is a large-scale space structure consisted with a 240m-long elevator shaft and four functional elements. Even non-trained people can enjoy staying in the Space Hotel in Low Earth Orbit.
  2. Types of space hotel

  3. The hotels themselves will vary greatly - from being quite spartan in the early days, to huge luxury structures at a later date. It's actually surprising that as late as 1997 very few designs for space hotels have ever been published.This is mainly because those who might be expected to design them haven't expected launch costs to come down far enough to make them possible.Luckily it's easy to design basic accommodation in orbit - because it was already done in 1973 with the "Skylab" space station. Minimal living facilities require a cylindrical module with air-conditioning, some windows, and a kitchen and bathroom. But zero gravity allows you to build almost any shape and size, in almost any direction. So exploiting the full range of possibilities of zero gravity architecture will keep designers happy for decades! There'll also be rotating (and tethered) structures giving artificial gravity.

  4. Space Hotel as a Business

  5. An artists rendering of a shuttle docking with the Galactic Suite hotel is seen in an undated publicity photo. 'Galactic Suite', the first hotel planned in space, expects to open for business in 2012 and would allow guests to travel around the world in 80 minutes. REUTERS-Galactic Suite-Handout

  6. "Galactic Suite", the first hotel planned in space, expects to open for business in 2012 and would allow guests to travel around the world in 80 minutes.
    Its Barcelona-based architects say the space hotel will be the most expensive in the galaxy, costing $4 million for a three-day stay.
    During that time guests would see the sun rise 15 times a day and use Velcro suits to crawl around their pod rooms by sticking themselves to the walls like Spiderman.
    Company director Xavier Claramunt says the three-bedroom boutique hotel's joined up pod structure, which makes it look like a model of molecules, was dictated by the fact that each pod room had to fit inside a rocket to be taken into space.
    "It's the bathrooms in zero gravity that are the biggest challenge," says Claramunt. "How to accommodate the more intimate activities of the guests is not easy."
    But they may have solved the issue of how to take a shower in weightlessness -- the guests will enter a spa room in which bubbles of water will float around.
    When guests are not admiring the view from their portholes they will take part in scientific experiments on space travel.
    Galactic Suite began as a hobby for former aerospace engineer Claramunt, until a space enthusiast decided to make the science fiction fantasy a reality by fronting most of the $3 billion needed to build the hotel.

    An American company intent on colonizing Mars, which sees Galaxy Suite as a first step, has since come on board, and private investors from Japan, the United States and the United Arab Emirates are in talks.
  7. PLENTY RICH ENOUGH
    If Claramunt is secretive about the identity of his generous backer, he is more forthcoming about the custom he can expect.
    "We have calculated that there are 40,000 people in the world who could afford to stay at the hotel. Whether they will want to spend money on going into space, we just don't know."
    Four million dollars might be a lot to spend on a holiday, but those in the nascent space tourism industry say hoteliers have been slow on the uptake because no one thought the cost of space travel would come down as quickly as it has.
    Galactic Suite said the price included not only three nights in space. Guests also get eight weeks of intensive training at a James Bond-style space camp on a tropical island.
    "There is fear associated with going into space," said Claramunt. "That's why the shuttle rocket will remain fixed to the space hotel for the duration of the guests' stay, so they know they can get home again."
    In an era of concern over climate change, Galaxy Suite have no plans so far to offset the pollution implications of sending a rocket to carry just six guests at a time into space.
    "But," says Claramunt, "I'm hopeful that the impact of seeing the earth from a distance will stimulate the guests' urge to value and protect our planet."

  8. For More Details:
  9. http://www.dailymail.co.uk/travel/article-1224629/Galactic-Suite-Space-Resort-hotel-2012-First-space-hotel-open-tourists.html

  10. http://edition.cnn.com/2007/TECH/08/14/space.hotel.reut/index.html?eref=rss_space

Powered by Blogger.